Wall mounted coat rack – A rack is a basic woodworking project that can be completed as a weekend it yourself project. The frame is mounted to the wall and has four decorative coat hooks of metal. The hooks are mounted on a hardwood board. The board can be painted or finished with a light wood finish to show the natural beauty of the wood. This style is ideal for rack mounting in a mud room, entrance hall or workshop.
Wall mounted coat rack, place the wooden board with the side 8 by 24 inches on a flat work surface. Measure 4 inches from each end of the table and check the measurement in the center of the width of the plate using a tape measure and a pencil. Place the gasket on the table of a drill with a 24-inch edge flush against the fence of the drill press table.
Wall mounted coat rack, drill a 1/4-inch by the board of each pencil mark using a drill 1/4-inch. These are the mounting holes. They are spaced 16 inches apart for you to hold them on the wall studs. Sand the entire plate with sandpaper grain 120, in the same direction as the grain of the wood until it is completely smooth.People Like This Terms : rack design wall unique