To plug in wall sconces, you must tturn off electricity supply fuses you want to work with. Cut into the wall with a keyhole saw to gain access to the junction box. Junction box is the plastic box that houses the room’s electrical connections. Then, Connect the wires in the panel fixture to the junction box for the wiring diagram included with your sconce set. Panel Valve piece with plug to bulb.
Place the adapter bracket that came with your sconce on the junction box. This bracket is a flat rectangular piece of metal, which are secured vertically to the junction box and has a long screw extending outwardly from the center. With a screwdriver, drive the screws that came with sconce in the predrilled holes in the holder. Next steps to plug in wall sconces, Install the panel fitting the adapter bracket. The long screw adapter holder to reach through a hole in the panel fixture, and enduring a small way, when the panel is pressed against the wall. A small nut called mounting nut is screwed into the end of the screw protruding from the panel. Turn the mounting nut until the panel assembly is tight against the wall.
Last steps to plug in wall sconces, Insert a bulb into the socket and secure the cover to the decorative sconce. Some covers will have small clips around the outside edge that is attached to the panel assembly. Others may have very small tabs at the edges of the cover through which the screws are inserted and screwed into the wall. A third row sconce cover features a slip-on cover. This version will just rest on the panel mounting.