A metal kitchen backsplash can add color and texture to the area behind the kitchen counters. metal tiles are available in a wide variety of metallic colors to match any decor. Many raised patterns to choose from that can add texture to the back wall. A backsplash tiles metal is easy to clean. Because the metal backsplash up into larger sections regular tile, a long time is needed to install.
Clean the wall where you are installing metal kitchen backsplash and let it dry. This will cause the glue to adhere to the metal wall the best. Protect countertops and appliances with old newspapers. Disconnect the power to the wall (s) that is covering energy. Remove outlet covers. Mark where you have to cut holes in the can for points of sale. Use a drill to make a hole in each of the four corners marked. Slide the nose of a pair of metal snips to cut the holes drilled for the outlet. Dry Cleaning fit the tile to make sure it will be level. Trim the edges if necessary. Put construction adhesive on the back of the first panel with a caulk gun. Use a spatula to spread it out to cover the entire panel. Set the panel in place making sure it is straight. Press out any air bubbles.
Repeat the process with the next panel. Overlapping panels using the built-subsidy. Join the two adjacent panels with cone head nails matching tile metal. Install the remaining panels. Put masking tape on both sides of all edges between the countertop and metal kitchen backsplash and under cabinets. Apply a coat of clear painter putty to seal the edges. Allow the putty to dry, then paint with matching color. Remove the painter’s tape as soon as you finish the painmetalg. Finish the side seams with stained wood trim to match the metal.